Standards for RTOs 2025: what trainers and assessors need to know

By the TrainersCPD editorial team.

A plain-English walk through the parts of the Standards for RTOs 2025 that affect individual trainers and assessors. It covers Outcome Standards 3.2 and 3.3, the Credential Policy, PD hours and state start dates.

The short version

Since 1 Jul 2025, RTOs regulated by ASQA have worked under the Standards for RTOs 2025, which replaced the Standards for RTOs 2015. If you train or assess in VET, four things matter most:

  • You hold a credential that lets you train and assess, or you work under direction while you complete one.
  • Your industry skills and knowledge are current for the training products you deliver.
  • You keep developing your training and assessment practice.
  • Your RTO can show all of this with evidence.

The 2025 Standards do not set a number of PD hours. Your RTO decides how much development it expects from you and how it records it.

How the 2025 Standards are organised

The Standards have three parts:

  1. The Outcome Standards. These include the standards about the VET workforce, which is where trainers and assessors come in.
  2. The Compliance Requirements. These are the Compliance Standards plus the Fit and Proper Person Requirements.
  3. The Credential Policy. This sets out who can train and assess, and on what terms.

The Outcome Standards and the Compliance Requirements are made as legislative instruments under the National Vocational Education and Training Regulator Act. The Credential Policy is published on training.gov.au. The latest version we found is dated 10 Dec 2025, so check you are reading the current one.

Outcome Standard 3.2: credentialled people who keep developing

Standard 3.2 begins: "Training and assessment is delivered to VET students by credentialled people with current skills and knowledge in training". Your RTO has to show how it makes sure all trainers and assessors "undertake continuing professional development to maintain current skills and knowledge". That includes the skills you use to engage and support VET students, not only your assessment technique.

The Department of Employment and Workplace Relations (DEWR) says the revised Standards "will still require all trainers and assessors to undertake professional development". That applies to everyone, including people who have held a TAE qualification for many years.

In practice, PD under Standard 3.2 is about your craft as a trainer: planning sessions, assessing fairly, giving feedback, adjusting for different learners, and looking after student wellbeing.

Outcome Standard 3.3: current industry skills and knowledge

Standard 3.3 reads: "Training and assessment is delivered by persons with current industry skills and knowledge relevant to the training product." Each person who delivers must keep an understanding of current industry practice relevant to what they train or assess. An RTO may also engage an industry expert for a specific need, under its own oversight.

ASQA puts it simply: "Trainers and assessors must have both the TAE qualification and industry competencies." Its FAQs list ways to stay current, such as working or volunteering in industry, formal industry training, industry association membership, networking and reading industry publications. How often you need to do this depends on the training product.

For examples and how to record them, see our guide to industry currency evidence.

The Credential Policy in brief

The Credential Policy decides whether you can work on your own or need direction. ASQA's Practice Guide on the Credential Policy (version 2, Oct 2025) explains it in detail. The key points:

  • Without direction: you hold a listed credential, such as TAE40122 or a diploma or higher in adult education or VET.
  • Working towards a TAE credential: you can deliver training and contribute to assessment under direction while you make satisfactory progress to finish within two years of starting.
  • Under direction with a skill set: you can deliver training under direction but cannot make assessment judgements.
  • Giving direction: only a holder of TAE40122 or TAE40116, with relevant industry competencies, can direct others.
  • TAE40110 holders: since 1 Jul 2025 you no longer need the two extra units that used to be required.
  • TAA40104: this older qualification is not a listed credential.

Our Credential Policy guide goes through each route.

What about PD hours?

Neither the 2015 nor the 2025 Standards set a number of PD hours for trainers. ASQA's FAQs say "the volume of hours of professional development needed to maintain currency will vary". Many RTOs set their own internal target in a PD policy, which is a reasonable way to plan, but it is the RTO's rule and not the regulator's. Ask your RTO for its PD policy so you know what it expects of you.

Does your state follow the 2025 Standards?

  • ASQA-regulated RTOs: from 1 Jul 2025.
  • Western Australia (TAC): the Registration Standards 2025 took effect on 1 Oct 2025, with a transition period to 31 Dec 2025. All WA RTOs moved to the 2025 Standards on 1 Jan 2026. See our WA page.
  • Victoria (VRQA): new VRQA guidelines that bring the 2025 Standards into Victoria's framework commence on 1 Jan 2027. If your RTO is registered with the VRQA, check with your RTO or the VRQA which requirements apply before then. See our Victoria page.

What to do this month

  1. Check your credential against the Credential Policy and note whether you work with or without direction.
  2. List the units you deliver and, for each one, when you last did something that kept your industry knowledge current.
  3. Ask your RTO for its PD policy and any internal target.
  4. Put your evidence in one place: certificates, industry time, reflections and supervision notes.

Where TrainersCPD fits

TrainersCPD courses cover training and assessment practice, and each one credits CPD hours to your record. Every certificate carries a QR code that anyone, including an auditor, can check at /verify. You can also upload PD you did elsewhere, including industry time, so your record shows everything together. The account is free.

ASQA does not approve PD providers, so no course can be "approved" for the Standards. Your RTO decides how each piece of PD fits your development plan. If you want PD chosen around the 2025 Standards, start with PD under the Standards for RTOs 2025.

Request a callback

Frequently asked questions

When did the Standards for RTOs 2025 start?

For ASQA-regulated RTOs, on 1 Jul 2025. WA RTOs moved over by 1 Jan 2026, and new VRQA guidelines in Victoria commence on 1 Jan 2027.

Do the 2025 Standards set PD hours for trainers?

No. They require ongoing PD and current industry skills but set no hours. Many RTOs set an internal target.

What are the three parts of the 2025 Standards?

The Outcome Standards, the Compliance Requirements and the Credential Policy.

Does ASQA approve PD courses for trainers?

No. ASQA does not approve PD providers. Your RTO decides how a piece of PD fits your plan and keeps the evidence.

Sources

More guides

Request a callback · Browse courses